Friday, December 6, 2013

DIY: Button Ring

Hi! Here is a DIY on turning an old button into a fancy statement rings =)


You Will Need: 
Button
Ring Blank
E6000 Glue 
Nail File
Pilers

Directions

1. Take the piler tool and remove the shank from back of the ring.

2. Make sure the back of ring is flat. If not, use an old nail filer and gently grind it down.

3. Apply E6000 glue to the back of button (or on flat area of ring) and attach.

4. Let it dry for 24 hours. 

ENJOY ^.^

No comments:

Post a Comment